![PIXIS XO photo](https://www.princetoninstruments.com/wp-content/uploads/2020/03/PIXIS-XO-6-ConFlat.png)
PIXIS-XO highly sensitive, thermoelectrically cooled cameras utilize various back-illuminated CCDs without antireflective coating for direct detection of x-rays. A rotatable ConFlat flange with a high-vacuum-seal design make these cameras well suited for UHV applications.
- ~30 eV to ~20 keV x-ray sensitivity
- CCDs of varying sizes without antireflective coating
- Rotatable ConFlat flange design
Key Features
![](https://www.princetoninstruments.com/wp-content/uploads/2020/03/XO-MTE-energy-range-b-2.jpg)
Ultimate X-Ray Imaging Capability
The PIXIS-XO offers high x-ray sensitivity over the 30 eV to 20 keV range.
![](https://www.princetoninstruments.com/wp-content/uploads/2020/03/Rotatable-conflat-PIXIS-XO-250.png)
Rotatable ConFlat Design with X-Ray Sensitivity
The rotatable ConFlat design offered by the PIXIS-XO delivers flexibility to align CCD x-axis to the image or spectral axis.
Combining this with sensitivity in the ~30 eV – 20 keV x-ray energy range the PIXIS-XO is able to cover a wide variety of applications.
![](https://www.princetoninstruments.com/wp-content/uploads/2020/04/PIXIS-XO-CCD-diagram-1024-800w-02-1.png)
Ultimate Flexibility
Dual-amplifier readout design allows for optimization of system performance, with the lowest possible read noise, highest dynamic range and best linearity.
![Lightfield Graph](https://www.princetoninstruments.com/wp-content/uploads/2020/03/LightField300x200.png)
Powered by LightField Software
Powerful and intuitive software with built-in math engine allows for the complete control of cameras and spectrographs, with real-time image analysis and spectral data.
LightField software provides seamless integration of hardware controls and direct data acquisition into programmes such as National Instruments’ LabVIEW® and MathWorks’ MATLAB®. This software also fully supports IntelliCal automated wavelength and intensity calibration.
The PIXIS-XO can also be fully controlled by PICAM SDK, eliminating any overhead that can occur when communicating through other development environments.
Family Specifications
Cooling method | Thermoelectric air or liquid cooling |
---|---|
Operating environment | +5℃ to +30℃ non-condensing |
Vacuum Compatibility | 10-8 Torr |
Supported interfaces | USB 2.0 |
Camera Models
B: Back-illuminated
BR: Back-illuminated, deep-depletion